خزانة عرض الأدوية

South Africa · 2015

نظرة عامة على المشروع

هذا medicine display cabinet project was produced in 2015 for a clinic dispensary in South Africa. The room doubles as a dispensing point and a treatment prep area, and the team needed lockable, dust-free storage that could be restocked from the front without carrying boxes into the treatment zone.

The package contained four white medicine cabinets with nine adjustable shelves each and a glass or solid panel front, two slatted open tower units for fast-moving stock, a low dispensing counter with a sink, three base cupboards and a green full-height storage run along the side wall. Cabinet bodies are 18 mm melamine with 2 mm ABS edges; shelves are rated for boxed medicine and carry a 30 mm front lip.

The layout separates clean and dirty flows. The cabinets stand against the internal wall, away from the sink and the treatment couch, so stock is never handled over a wet surface, and the open towers face the dispensing counter at arm’s length for items issued most often. Shelf pitch is set at 250 mm because most cartons are shallow, with two 350 mm gaps left for larger packs. The white finish was chosen so lot numbers and expiry dates can be read quickly, and the green run marks the storage end of the room without a separate partition.

Cabinets ship fully assembled with shelves and locks fitted, wrapped and crated on pallets. On site the crew levels them on adjustable feet, anchors the tall units to the wall, checks that every door closes on the same gap, then fits the counter and connects the sink. Locks are keyed alike per cabinet so one key set covers the room.

Customization covers cabinet height and width, shelf count and pitch, glass or solid doors, lock type, keyed-alike grouping, counter length and sink position.

احصل على عرض سعر مخصص

نرد خلال 24 ساعة في أيام العمل. تبقى بياناتك سرية.

النموذج الرئيسي

الهاتف / واتساب+86-13925899945
البريد الإلكتروني[email protected]
العنوانغوانغتشو، باييون، طريق جينكسين، الشارع الثاني لونغكانغ رقم 7، الغرفة 203
ساعات العملالاثنين–السبت 9:30–23:30
مصنعنا

مصمم لمتاجر التجزئة، وموثوق عالميًا

1998
منذ
3,200 متر مربع
مساحة الإنتاج
100+
فريق داخلي
400+
المشاريع / السنة
حوالي 3,000 قطعة
الإنتاج الشهري
CE و ISO 9001
معتمد
خدماتنا

من مخطط الأرضية إلى التركيب، يتم التعامل معه داخليًا

1

تخطيط المساحة

تخطيط المساحة وتصميم ثلاثي الأبعاد لتخطيط المتجر قبل بدء الإنتاج

2

تصميم العرض

تصميم عرض مخصص مع رسومات CAD وصور ثلاثية الأبعاد لموافقتك

3

التجهيزات والإضاءة

أنظمة الأرفف والكاونترات والجدران الخلفية لأي شكل من أشكال متاجر التجزئة، مع دمج إضاءة LED، مجهزة وجاهزة للتوصيل

4

التركيب

فرق تركيب في الموقع في الولايات المتحدة وألمانيا وأستراليا

الشهادات

مصنوع وفق المعايير الدولية، ومصمم ليدوم

الشهادات — الامتثال لمعايير ISO والتصدير

التزاماتنا

تغليف قابل لإعادة الاستخدام وإعادة التدوير
الامتثال للمعايير الدولية
مواد مسؤولة بيئيًا
إضاءة LED موفرة للطاقة
تصاميم هيكلية طويلة العمر

الشهادات والمعايير

إدارة الجودة القائمة على ISO
وثائق الامتثال للتصدير
سلامة المواد للأسواق العالمية
تقلل واجهات العرض المستدامة من تكلفة الاستبدال وتحسن العائد على الاستثمار على المدى الطويل.