訂製珠寶展示櫃的費用是多少？

客製珠寶展示櫃的工廠直營價格：一個$300的櫃檯、一個$8,000的島櫃，以及一個全店專案各自能帶給你什麼——外加運費、關稅、打樣，以及30–45天的生產時程。.

目錄

關鍵要點

  • 工廠直營的話，一個單標準櫃檯從數百美元起跳。一個客製島櫃為$2,000–8,000，而一個全店專案則落在五位數。.
  • 有四件事會影響價格：尺寸、材質、照明和玻璃規格。不是「高級」品牌。.
  • 打樣費用為$100–300，通常可折抵生產訂單。.
  • 以平板包裝（KD）而非組裝後出貨，可將運費降低一半或更多。.
  • 標準生產期為30–45天。急單可壓縮工期，但需付出代價。.

大多數買家最先寄給我們的一個問題是：這要多少錢？這問題很合理，而誠實的答案是範圍，不是一個數字。珠寶展示櫃不是貨架產品。同一個1.2公尺櫃檯可能花費$300或$2,500，取決於它如何製造，而差異不是加價，而是規格。.

以下是我們在工廠如何為一個櫃子定價，讓你能讀懂報價而不用猜。.

客製珠寶展示櫃要多少錢？

從底價開始。工廠直營價格，不含運費——你實際會支付的展示櫃價格，不是標價數字：

  • 單直櫃檯 （1.2公尺、MDF櫃體、強化玻璃、無照明）：數百美元起，約$300–800。.
  • 加裝LED照明：每單位$50–150，取決於燈條密度，以及你要背光面板還是僅層板邊緣照明。.
  • 客製島櫃或高櫃：$2,000–8,000。跳升的不是材料，而是一次性金屬加工和玻璃切割。.
  • 全店訂製專案 （多個櫃檯、壁櫃、島櫃）：$10,000起，按圖報價。.

這些就是 客製珠寶展示櫃檯 背後的數字，我們製造的單一櫃檯是對照整店規格來配置的。 珠寶展示櫃檯 的範圍位於該區間底部，因為它是平面、標準玻璃的單位。當一個展示櫃價格遠超出這些數字時，很少是更便宜或更高級，而是不同規格。問問改變了什麼：通常是玻璃或照明，不是木材。.

什麼因素會推高價格？

Four levers, in the order they hit the quote. Curved glass is one of the biggest cost drivers — it requires custom bending and tempered glass tooling. See our curved display cabinet project (JW-24) for an example of what curved glass looks like and why it costs more.

  • 尺寸和形狀。. 一個直線1.2公尺櫃檯幾乎是標準產品。一個弧形3公尺島櫃是為你單獨裁切，而弧形玻璃的成本遠高於平面玻璃。.
  • 材質。. MDF櫃體是基礎。不鏽鋼框架、實木或石材檯面各自會增加成本。我們在 MDF與膠合板; 中拆解了材質取捨；大多數櫃檯內部是膠合板或MDF，而你付費的是可見材質。不鏽鋼框架相較MDF大約會讓櫃體成本線翻倍，實木硬木櫃體可能增至三倍，而石材檯面是按板材計價，不是按櫃子計價。.
  • 玻璃規格。. 標準強化玻璃是預設選項。低鐵玻璃可去除綠色色調，成本更高，但對鑽石和白色金屬很重要。防盜用的夾層玻璃會再增加成本。完整玻璃說明在 我們的展示櫃類型指南.
  • 照明。. 沒有照明的櫃子製造成本更低，但銷售時也更暗淡。我們在 珠寶展示櫃照明指南.

中設定了照明規格以及做錯的成本。.

運費和關稅會增加多少？

客製櫃的大部分價格在於玻璃和金屬，因為那些是按你的圖紙裁切和加工。木材是便宜的部分，這會讓以為自己是在為框架付費的買家感到意外。.

workers flat-packing display case components into a wooden crate with foam
USITC關稅表.

Ask for a freight estimate at the quote stage, not after. A factory quote covers the case; the freight line is separate and moves with oil prices and routing.

你如何解讀工廠報價？

Quotes are short, and the useful information is in four lines.

  • The case line is the unit price. This is the number everyone compares, and the one that means the least on its own.
  • The glass and lighting lines are where two quotes that look alike diverge. Low-iron versus tempered, 120 LEDs per meter versus 60. If a competitor is 30% cheaper, this is usually where the difference lives.
  • The freight line may be quoted separately or as EXW, FOB or CIF. EXW means you arrange shipping from the factory gate; CIF means the price includes freight and insurance to your port. Know which one you are holding.
  • The terms line covers deposit and balance. Typical is 30% deposit to start production, balance before shipment, but it varies by order size.

A quote that does not break these out is a quote you should ask to see broken out. It is not that the factory is hiding something; it is that a single number does not tell you what you are buying.

最低訂購量和打樣如何運作？

Factories use minimum order quantities, but the term hides what actually matters.

  • Sampling first. A sample costs $100–300 depending on spec. It is built to your drawing, and the fee credits against the production order when you proceed. If you cancel, you still own a sample.
  • MOQ is usually small for custom. Because each case is built to a drawing, the real MOQ is one unit. The catch is that unit price drops at 5, 10 and 20 units, because setup cost spreads. If your plan is five stores, order one and quote the five.

The sample step is the cheapest insurance you can buy. Most expensive rework starts with a drawing that looked right on paper and wrong in glass.

生產需要多長時間？

Plan 30–45 days for a standard custom program: a week for drawings and glass cutting, two to three weeks for metalwork and finishing, then assembly, QC and packing. Rush orders compress this to 15–20 days by pulling your job ahead in the queue, which costs a premium.

panel saw cutting board stock for custom jewelry display cases
Board stock cut to size on the panel saw — material is bought in week one, which is why the deposit starts production.
shearing machine cutting steel sheet for display case frames
Steel sheet sheared to width — frame steel is priced by weight, so heavier specs move the quote.
laser cutting machine cutting custom metalwork for a jewelry display case
Laser cutting one-off metalwork — the machine time behind the jump from counter pricing to island pricing.
bending machine forming steel frame channels for display cases
Sheet steel bent into frame channels — each custom profile is a one-off setup.
cold press machine bonding display case panels flat
Panels cold-pressed and bonded flat — lamination quality decides whether a finish lasts or gets reworked.
gang drilling machine drilling display case cabinet sides
Gang drilling cabinet sides in one pass — setup cost that spreads thin at quantity and runs heavy at one unit.
worker hand-polishing a white stone countertop for a jewelry display case
Hand-polishing a stone top — finishing is labor hours, and labor is what rush premiums pay for.
spray booth finishing of display case surfaces with water curtain
Spray finishing in a water-curtain booth — finish quality is the first thing buyers judge and the first thing rework costs.
CNC engraving machine engraving custom display case detail
CNC engraving in the machining area — artwork is a one-time program, not a per-unit cost.
workers assembling custom display case cabinets on the factory floor
The assembly floor — hardware, locks and lighting are fitted here, and each is a line on the quote.
QC inspector measuring a glass display case against the drawing
Dimensional QC against the drawing before packing — catching a spec error here is free; catching it in your store is freight.

Freight adds to the calendar on top of that. A KD shipment by sea is measured in weeks; air freight cuts it to days and multiplies the cost. If you are working to a store opening, tell us the date on the first call, because the freight mode decision changes the whole build schedule.

常見問題

Why do two quotes for the same case differ so much?

They are rarely for the same case. One is quoting MDF and tempered glass, the other low-iron glass and stainless trim. Read the spec line, not the bottom number, and the gap usually explains itself.

Is a cheap display case worth it?

Depends what carries the load. A static MDF counter with standard glass holds jewelry fine for years. Where cheap cases fail is lighting and locks, the two things customers and insurers notice first. Spend on those, save on the wood.

Can I order one custom case?

Yes. Custom does not require volume, it requires a drawing. The unit price is higher at quantity one, but the setup cost on a single counter is small enough that it rarely makes sense to buy a standard case that does not fit your store.

What should I prepare before asking for a quote?

Three things: dimensions or a floor plan, a material preference even if it is a guess, and a photo of the space. You do not need final decisions. Getting those three on the table saves a week of back-and-forth and gets you a real number instead of a placeholder.

Does the quote include the checkout counter?

No. Checkout counters are a separate line, because they are built for a different job. The display case cost covers the cases; the cash wrap is specced and priced on its own. If you are budgeting a full store, add the checkout separately — the formats are in our checkout counter guide.

Why is factory-direct cheaper?

Because you are removing a link, not because the case is built worse. A distributor marks up to cover warehouse, showroom and margin. Factory-direct, the same drawing goes straight to the floor. The trade-off is you own more of the process: you check the drawings, approve the sample, arrange freight. Some buyers want that control; others want a local showroom to walk into.

Send us the drawing or a floor plan with dimensions, and we return a line-item quote: case, glass, lighting, freight and a production date. The price you get is the price we build to, because the factory is where the number comes from. Samples in 7–10 days, production in 30–45.

分享你的愛

相關文章