Tiendas de armas · Caso GS-01

Armario expositor de armas

Canada · 2014

Resumen del Proyecto

This gun display cabinet project was built for a licensed firearm retailer in Canada in 2014. The store trades from a street-front unit with a long sales wall and a narrow service aisle, and the owner needed the whole range visible from the entrance while keeping the display stock behind lockable glass and the backstock out of the customer zone.

The fit-out contained eight wall display bays forming roughly 18 linear metres of wall system, each with a black steel frame, a green pegboard back panel, adjustable shelf standards and a lockable lower cabinet; two service counters totalling 4.8 m with glass tops, a six-drawer bank and a raised transaction shelf; two 1.2 m end cabinets; and a continuous LED strip recessed under every counter and cabinet plinth.

The design is deliberately dark so the display reads under light rather than colour. Charcoal walls, black frames and the green back panels absorb the room, red handle details mark the staff access points, and the only bright surfaces are the white worktops and the glass. Vertical standards at 50 mm pitch let the retailer re-space the wall as stock changes, and each bay is set 150 mm off the wall so cabling and lighting run behind the frame. The service counters face the entrance in an L, so one staff member can watch the door while handling a transaction.

Bays ship as pre-assembled frames with the pegboard panels, shelf standards, LED strips and drivers fitted; the lower cabinets are built as separate lockable units so they can be levelled independently on an older floor. On site the crew fixes each bay to wall studs through the frame, sets the counters on levelling feet, joins the runs with black infill panels, and connects the shelf lighting and plinth lighting to two switched circuits. Handover includes a check of every lock, door alignment and light continuity.

Customization covers bay width and height, shelf pitch, pegboard colour, frame finish, counter length, drawer-bank size and the lock specification required by the retailer’s insurance.

Obtener una cotización personalizada

Respondemos en un plazo de 24 horas en días hábiles. Sus datos permanecen confidenciales.

Formulario principal

Tel / WhatsApp+86-13925899945
Correo electrónico[email protected]
DirecciónHabitación 203, No. 7 Calle Longkang 2, Carretera Jinxin, Baiyun, Guangzhou
HorarioLun–Sáb 9:30–23:30
Nuestra Fábrica

Diseñado para el comercio minorista, con confianza en todo el mundo

1998
Desde
3.200 ㎡
Área de producción
100+
Equipo interno
400+
Proyectos / Año
~3.000 unidades
Producción mensual
CE e ISO 9001
Certificado
Nuestros Servicios

Desde el plano hasta la instalación, gestionado internamente

1

Planificación del Espacio

Planificación del espacio y distribución 3D de la tienda antes de iniciar la producción

2

Diseño de Exhibidores

Diseño de exhibidores personalizados con planos CAD y renderizados 3D para su aprobación

3

Mobiliario e iluminación

Sistemas de estanterías, mostradores y paredes traseras para cualquier formato retail. Integración de iluminación LED, cableada y lista para conectar

4

Instalación

Equipos de instalación en sitio en EE. UU., Alemania y Australia

Certificaciones

Fabricado según estándares internacionales, hecho para durar

Certificaciones — ISO y cumplimiento de exportación

Nuestros compromisos

Embalaje reutilizable y reciclable
Cumplimiento de estándares internacionales
Materiales ambientalmente responsables
Iluminación LED de bajo consumo
Diseños estructurales de larga vida útil

Certificaciones y normas

Gestión de calidad basada en ISO
Documentación de cumplimiento para exportación
Seguridad de materiales para mercados globales
Los expositores sostenibles reducen el costo de reemplazo y mejoran el ROI a largo plazo.