Armureries · Cas GS-01

Gun Display Cabinet

Canada · 2014

Aperçu du projet

This gun display cabinet project was built for a licensed firearm retailer in Canada in 2014. The store trades from a street-front unit with a long sales wall and a narrow service aisle, and the owner needed the whole range visible from the entrance while keeping the display stock behind lockable glass and the backstock out of the customer zone.

The fit-out contained eight wall display bays forming roughly 18 linear metres of wall system, each with a black steel frame, a green pegboard back panel, adjustable shelf standards and a lockable lower cabinet; two service counters totalling 4.8 m with glass tops, a six-drawer bank and a raised transaction shelf; two 1.2 m end cabinets; and a continuous LED strip recessed under every counter and cabinet plinth.

The design is deliberately dark so the display reads under light rather than colour. Charcoal walls, black frames and the green back panels absorb the room, red handle details mark the staff access points, and the only bright surfaces are the white worktops and the glass. Vertical standards at 50 mm pitch let the retailer re-space the wall as stock changes, and each bay is set 150 mm off the wall so cabling and lighting run behind the frame. The service counters face the entrance in an L, so one staff member can watch the door while handling a transaction.

Bays ship as pre-assembled frames with the pegboard panels, shelf standards, LED strips and drivers fitted; the lower cabinets are built as separate lockable units so they can be levelled independently on an older floor. On site the crew fixes each bay to wall studs through the frame, sets the counters on levelling feet, joins the runs with black infill panels, and connects the shelf lighting and plinth lighting to two switched circuits. Handover includes a check of every lock, door alignment and light continuity.

Customization covers bay width and height, shelf pitch, pegboard colour, frame finish, counter length, drawer-bank size and the lock specification required by the retailer’s insurance.

Obtenir un devis personnalisé

Nous répondons sous 24 heures les jours ouvrables. Vos informations restent confidentielles.

Formulaire principal

Tél / WhatsApp+86-13925899945
AdresseChambre 203, No. 7 Longkang 2ème Rue, Rue Jinxin, Baiyun, Guangzhou
工作时间Lun–Sam 9h30–23h30
Notre usine

Conçu pour le commerce de détail, approuvé dans le monde entier

1998
Depuis
3,200平方米
Surface de production
100+
Équipe interne
400+
Projets / An
约3,000件
Production mensuelle
CE & ISO 9001
Certifié
Nos services

Du plan d'aménagement à l'installation, pris en charge en interne

1

Planification de l'espace

Planification de l'espace et agencement 3D du magasin avant le début de la production

2

Conception des présentoirs

Conception de présentoirs sur mesure avec plans CAO et rendus 3D pour votre approbation

3

Agencements & Éclairage

Systèmes d'étagères, de comptoirs et de murs arrière pour tout format de commerce de détail Intégration d'éclairage LED, câblé et prêt à brancher

4

Installation

Équipes d'installation sur site aux États-Unis, en Allemagne et en Australie

认证资质

Conçu selon les normes internationales, fabriqué pour durer

Certifications — Conformité ISO et export

Nos engagements

Emballage réutilisable et recyclable
Conformité aux normes internationales
Matériaux respectueux de l'environnement
Éclairage LED économe en énergie
Conceptions structurelles à longue durée de vie

Certifications & Normes

Gestion de la qualité basée sur l'ISO
Documentation de conformité à l'exportation
Sécurité des matériaux pour les marchés mondiaux
Les présentoirs durables réduisent les coûts de remplacement et améliorent le ROI à long terme.